HB60-64X20 integrated power combo for heavy-lift UAV and eVTOL platforms
The MAD HB60-64X20 is an integrated drone power combo consisting of an M50C60 IPE motor, SineSic Pro 80A FOC ESC and CB2 64×20 in propeller. It is listed for large multirotor and eVTOL aircraft where each rotor is specified at 60kg continuous thrust and up to 24kW maximum power. The combo is listed with a 10KV option and CW, CCW or CW+CCW rotation choices.
Select the rotation and motor option to match the airframe layout. Confirm battery voltage, phase wiring, FOC settings, propeller direction, structural loads and cooling with the aircraft integrator before installation. The 60kg thrust and 24kW figures are listed product ratings, not a guaranteed aircraft-level payload or flight-time result.
This is not a plug-and-play consumer drone part. Do not infer complete-aircraft range, endurance, certification, redundancy or payload capability from the combo rating. Use a qualified propulsion engineer to validate the motor, ESC, propeller, battery, frame and control system as one system, and perform restrained ground testing before flight.
For a related HB60 configuration, compare the HB60-63×22 power combo. For a different heavy-lift system, review the AM110 power-system kit and browse the HB power-system category.
HB60-64X20 FAQ
What is included in the combo?
The listed combination is an M50C60 IPE motor, SineSic Pro 80A FOC ESC and CB2 64×20 in propeller.
What thrust and power are listed?
MAD lists 60kg continuous thrust per rotor and up to 24kW maximum power. Actual results depend on the complete aircraft system and test conditions.
Which options must be selected?
The listing identifies a 10KV option and CW, CCW or CW+CCW rotation choices. Confirm the required configuration before ordering.
