SineSic 100A Pro 800V is a high-voltage FOC ESC for large UAV propulsion systems that require a 450–850V supply range. The official MAD specification lists 100A continuous output, 200A peak output for 10 seconds, and 40kW rated output power. It is listed with CAN×2 communication, a 12V/1A BEC, and support for digital throttle communication.
Use this controller only with a motor, battery, wiring system, and cooling arrangement that are rated for the same voltage and current range. The listed battery configuration is 192–200S LiPo. The ESC supports 1100–1900μs PWM input at 50–500Hz, 3.3V/5V PWM input level, and firmware updates. The official operating-temperature range is −40°C to 50°C, with IPX7 protection and forced-air cooling. Maximum speed is listed as 120,000 RPM for a one-pole-pair motor. Do not treat the 100A rating as a complete propulsion-system recommendation; motor KV, propeller load, bus voltage, thermal path, and firmware settings must be matched before flight testing.
For a compatible high-voltage propulsion reference, review the AM160 4.5KV Heavy-Lift Power System Kit. Compare the Reachsky Drone ESCs and select a matched motor from Reachsky Drone Motors.
SineSic 100A Pro 800V FAQs
What voltage range is listed?
The official specification lists 450–850V operation.
What is the peak current rating?
The listed peak output is 200A for 10 seconds.
Which communication interfaces are available?
The ESC lists two CAN 2.0B interfaces at 1M bps and supports digital throttle communication.
