Detalles del producto

Productos FPV

DJI Goggles 3

Referencia: 0113SX0035

DJI Goggles 3 for matched UAV or FPV installation; confirm the Goggles 3 model, system compatibility and configuration before ordering.

$629.00

Cita sobre el volumen extraída de 50 unidades

¿Necesitas un marcado OEM o un bobinado a medida?
Details

DJI Goggles 3 for matched UAV or FPV installation

DJI Goggles 3 is identified by its listed model and component class. Confirm the exact configuration, interface, rotation, mounting pattern and included parts before ordering.

Match this component to the complete system, including battery, motor, propeller, ESC, wiring, cooling, mounting and firmware where applicable. Do not infer missing current duration, load rating, thrust, RPM, weight, certification or endurance from the product name or images.

This product is not a universal replacement. Verify polarity, cell count, mechanical fit, fastener size and operating limits before commissioning, then perform restrained testing.

For related selection, review the AM110 power-system kit, the VC propeller range, and browse the propeller category.

DJI Goggles 3 FAQ

What should be confirmed before ordering?

Confirm the exact model, interface, rotation, included parts and current documentation.

Can compatibility be inferred from appearance?

No. Verify the item against the specific aircraft, motor, battery and controller.

Does the listing establish a performance rating?

Only manufacturer-confirmed specifications should be used; do not infer missing ratings from images.

Experience true HD FPV footage with the DJI Goggles 3. Now featuring pass-through cameras and flip-up hinge. 

Features

Visionary Breakthrough
DJI Goggles 3 now has Real View PiP (Picture-In-Picture). Observe your surroundings without removing the goggles, for more safety and immersion. The Micro-OLED high-definition display and ultra-low-latency transmission bring the world in to view.

Specifications

Video Transmission
  • Video Transmission System: O4
  • Live View Quality: 1080p@30/50/60/100fps
  • Operating Frequency:
-2.400-2.4835 GHz
-5.170-5.250 GHz*
-5.725-5.850 GHz*
* 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.
  • Transmitter Power (EIRP):
-2.4 GHz
<33 dBm (FCC)
<20 dBm (CE/SRRC/MIC)
-5.1 GHz
< 23 dBm (CE)
-5.8 GHz
<33 dBm (FCC)
<30 dBm (SRRC)
< 14 dBm (CE)
  • Communication Bandwidth Max 60 MHz
  • Max Transmission Distance (unobstructed, free of interference)
-FCC: 13 km (subject to the aircraft’s max flight distance)
-CE: 10 km
-SRRC: 10 km
-MIC: 10 km
* Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.
  • Max Transmission Distance (unobstructed, with interference)
-Strong Interference: Urban landscape, approx. 1.5-4 km
-Medium Interference: Suburban landscape, approx. 4-10 km
-Low Interference: Suburb/seaside, approx. 10-13 km
* Data tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.
  • Max Transmission Distance (obstructed, with interference)
-Low Interference and Obstructed by Buildings: approx. 0-0.5 km
-Low Interference and Obstructed by Trees: approx. 0.5-3 km
* Data tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.
  • Max Download Speed: Wi-Fi: 30 MB/s
* Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.
  • Lowest Latency With DJI Goggles 3:
-1080p/100fps Video Transmission Quality: 24 ms
-1080p/60fps Video Transmission Quality: 40 ms
  • Max Video Bitrate: 60Mbps
  • Antennas: 4 antennas, 2T4R

Includes

  • 1x DJI Goggles 3
Preguntas frecuentes sobre el producto
What is the DJI Goggles 3 intended for?

This product is intended for UAV and multirotor integration where the listed model and configuration match the aircraft design. Confirm motor, ESC, battery, mounting, clearance and flight-test requirements before ordering.

How should I confirm compatibility for the DJI Goggles 3?

Please provide the aircraft or propulsion-system model, required quantity, operating environment and installation details. Check the published product information against the manufacturer's operating range; do not select from the name alone.

Can the DJI Goggles 3 be considered for OEM procurement?

It can be evaluated for an OEM or fleet project when the specification matches the target aircraft. For a quotation, share the model, quantity, application, destination and packaging or documentation requirements so compatibility and production details can be confirmed.

Productos que suelen comprarse juntos

Combina este artículo con los accesorios que los compradores suelen evaluar en el mismo presupuesto.

Total $927.78

4 artículos seleccionados

Casos de uso

Diseñado para equipos que necesitan un impulso continuo y opciones de configuración claras antes de fijar una referencia de volumen.

UAV Propulsion Integration

UAV Propulsion Integration

Conceptual application for integrating the DJI Goggles 3 into a compatible UAV propulsion system. Validate installation, loading, clearance and operating limits on the actual aircraft before deployment.

Professional UAV Platforms

Conceptual application for professional UAV development using the DJI Goggles 3. Confirm system interfaces, payload requirements and environmental conditions through the integrator's design review and flight testing.

OEM and Fleet Evaluation

Conceptual application for an OEM or fleet evaluation of the DJI Goggles 3. Final selection should follow aircraft-specific compatibility checks, procurement requirements and documented test procedures.

Acerca de REACHSKY

REACHSKY es un proveedor profesional de recambios para drones con sede en Changsha (China) y con 12 años de experiencia en el sector. Nuestra gama de productos abarca motores sin escobillas, controladores de velocidad (ESC), hélices, baterías para drones y accesorios relacionados. Contamos con nuestro propio equipo de I+D y una fábrica para los artículos de desarrollo propio, certificados según la norma ISO 9001. Además, somos el distribuidor exclusivo autorizado de varios fabricantes de renombre para los mercados de América del Norte, América del Sur y Europa. Más información sobre REACHSKY.

Las mejores opiniones de compradores de todo el mundo

Mike R.
Ágil

Compra verificada

Throw it on, retuned in one session. Feels lively without being twitchy after filters.

8 personas lo han encontrado útil