MAD PULSAR BL-S 8S 80A Single ESC
This single ESC is specified for 3–8S LiPo FPV systems, with 80A continuous current and 90A peak current for 10 seconds.
技术规格
| Model | Pulsar-BL-S 8S 80A Single |
|---|---|
| MCU | EFM8 BB21 |
| Firmware | BLHeli-S |
| MOSFET | 40V high-performance MOSFET |
| Input | 3–8S LiPo |
| Continuous current | 80A |
| Peak current | 90A |
| Telemetry | No |
| Protocol | DSHOT300/600 |
| Dimensions | 43 × 22 × 6.2mm |
| Weight | 9.7g |
Selection Notes
Use the single-channel format when separate ESC installation suits the aircraft wiring and power layout. Confirm cooling, interfaces and mounting before ordering.
索取报价
Send battery cell count, motor model, controller, quantity and required configuration for a quotation.
Q: How to Identify & Choose “BLHeli_S” or “BLHeli_32”
A: Identification: The easiest way is to check the label/sticker on your ESC — it usually states “BLHeli_S” or “BLHeli_32”. If not, refer to the product manual or specifications.
Software Compatibility: Do NOT mix up the configuration tools. Use BLHeliSuite for BLHeli_S and BLHeliSuite32 for BLHeli_32. Attempting to use the wrong suite will fail to detect the ESC.
Choice Guidance:
1. Choose BLHeli_S if you’re building a budget-friendly drone, performing casual flying, or simply need a reliable, proven system.
2.Choose BLHeli_32 if you’re building a high-performance racing/freestyle drone, require advanced telemetry (e.g., for RPM filtering), or want the best throttle response and protection features.
